Operate
6.2 Parameter description
SITRANS VP300 with or without HART
Operating Instructions, 03/2011, A5E01258666-03
69
Setting options:
< 3 s
3 ... 20 s
> 20 s
Purpose:
The defined travel time affects the control parameters of the
positioner.
"1.3.7 Adopt values"
Requirements:
Preceding settings for device replacementhave been made.
Factory setting:
Cancel
Purpose:
To set the positioner to the initialized status.
Description:
Select "OK" to accept the changed values. The values set above
come into effect. The positioner can now be set to automatic mode.
If you select "Cancel", the values are not accepted but remain in the
parameters.
6.2.1.4
"1.4 Reset"
This menu provides the following options:
● Delete the initialization values
● Reset to factory settings
● Repeat stroke calibration
"1.4.1 Reset initialization"
Factory setting:
Cancel
Purpose:
Reset initialization parameter to "Not initialized". All other parameter
settings are retained.
