Operate
6.2 Parameter description
SITRANS VP300 with or without HART
Operating Instructions, 03/2011, A5E01258666-03
105
6.2.3.6
"3.6 Settings"
Use this menu to carry out all diagnostics-relevant monitoring settings. You define basic
limits, configure and activate the monitoring function in accordance with the 3-stage
diagnostics concept of the positioner. The following table contains an overview of the menus
and parameters:
3.6.1 General valve fault
3.6.5.5 Factor 3
3.6.1.1 Activation
3.6.6 Number of direction changes
3.6.1.2 Basic limit value
3.6.6.1 Activation
3.6.1.3 Factor 1
3.6.6.2 Basic limit value
3.6.1.4 Factor 2
3.6.6.3 Factor 1
3.6.1.5 Factor 3
3.6.6.4 Factor 2
3.6.2 Stiction
3.6.6.5 Factor 3
3.6.2.1 Activation
3.6.7 Average value of position
3.6.2.2 Basic limit value
3.6.7.1 Activation
3.6.2.3 Factor 1
3.6.7.2 Time basis
3.6.2.4 Factor 2
3.6.7.3 State
3.6.2.5 Factor 3
3.6.7.4 Threshold 1
3.6.3 Shift lower endstop
3.6.7.5 Threshold 2
3.6.3.1 Activation
3.6.7.6 Threshold 3
3.6.3.2 Threshold 1
3.6.7.7 Start
3.6.3.3 Threshold 2
3.6.8 Lower temperature limit
3.6.3.4 Threshold 3
3.6.8.1 Activation
3.6.3.5 Tight closing
3.6.8.2 Unit
3.6.4 Shift upper endstop
3.6.8.3 Threshold 1
3.6.4.1 Activation
3.6.8.4 Threshold 2
3.6.4.2 Threshold 1
3.6.8.5 Threshold 3
3.6.4.3 Threshold 2
3.6.9 Upper temperature limit
3.6.4.4 Threshold 3
3.6.9.1 Activation
3.6.4.5 Tight closing
3.6.9.2 Unit
3.6.5 Number of strokes
3.6.9.3 Threshold 1
3.6.5.1 Activation
3.6.9.4 Threshold 2
3.6.5.2 Basic limit value
3.6.9.5 Threshold 3
3.6.5.3 Factor 1
3.6.9.4 Threshold 2
3.6.5.4 Factor 2
3.6.9.5 Threshold 3
