Commissioning
7.6 Manual initialization
SITRANS VP300 with or without HART
138
Operating Instructions, 03/2011, A5E01258666-03
7.6
Manual initialization
Requirement
You have prepared the positioner for commissioning, as described in section "Preparing for
Procedure
In order to initialize the positioner manually, proceed as follow:
1.
To change from the measurement view into the navigation view, click . You are in the
"1 Quick Start" main menu.
2.
Use and to switch to the menu "1.2 Manual initialization > 1.2.1 Actuator type >
Edit".
3.
Select the actuator type with or
The factory setting is "Linear <= 60 mm (2.36")".
4.
Confirm the selection with . The set actuator type is displayed.
5.
If required, set the tight closing function. Use and to switch to the menu "1.2.2 Tight
closing > Edit".
6.
Select the tight closing function with and
Factory setting is "Off".
7.
Confirm the selection with .
