Hardware description
3.5 MCI-PN board for SIMOTION P350-3
SIMOTION P350-3 and Panels
Manual, 05/2009
57
3.5.4
Slots for the MCI-PN board
Possible slots
The slot for the MCI-PN board is determined by the SIMOTION P350-3 equipment.
●
If the MCI-PN board is being used as an option together with the IsoPROFIBUS board,
the modules are plugged in as follows:
–
IsoPROFIBUS always in slot 1
–
MCI-PN-Board in slot 2 (directly above the motherboard)
●
In the case of a PROFINET-only solution, the MCI-PN board is always connected to
slot 1.
The above slot rules are fixed and must always be observed. If you do not follow the slot
rules, real-time capability problems (latency) can occur in SIMOTION P350-3.
3.5.5
Technical data for the MCI-PN board
Table 3- 14 Technical data for the integrated MCI-PN board
Technical data
Data transfer
Data transmission rate
10/100 Mbps (PROFINET only 100 Mbps)
Interfaces
Connection to 10BaseT/100BaseTx
RJ45 connection (4 units)
Connection to programming device/PC
PCI slot
Voltage
PCI power supply
DC + 5 V, ± 5%
Current consumption
Current consumption for PCI v 5 V
Max. 900 mA
Permissible ambient conditions
Temperature
Operation
Storage/transport
•
MCI-PN board in SIMOTION P
5 °C to 45 °C
- 20 °C to 60 °C
Tested according to
IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14
Relative atmospheric humidity
Operation
Storage/transport
•
MCI-PN board in SIMOTION P
5 % … 80 %
5 % … 95 %
Tested according to
IEC 60068-2-78, IEC 60068-2-30
Temperature change
Max. 10 K per hour in operation
Moisture condensation and ice formation
Not permissible
