Siemens SIMOTION P Series Manual Download Page 127

Page: 127 / 138

SIMOTION P350-3 and Panels
Manual, 05/2009

127

Appendix

A.1

Directives and declarations

Notes on CE marking

The following applies to the SIMOTION product described in this documentation:

EMC directive

The devices meet the requirements of EC directive 89/336/EEC "Electromagnetic

Compatibility" and bear the CE marking accordingly to indicate that they are suitable for use

in the following areas of application:

Field of application

Requirements for

Emitted interference

Immunity to interference

Industrial environment

EN 61000-6-4:2001

EN 61000-6-2:2001

The devices are also compliant with the EN 61000-3-2:2000 (harmonic currents) and

EN 61000-3-3:1995 (voltage fluctuation and flicker) standards.

Declaration of conformity

The EC declaration of conformity and the corresponding documentation are made available

to the relevant authorities in accordance with the EC directives cited above. Your sales

representative can provide these on request.

Observance of installation guidelines

The installation guidelines and safety instructions given in this documentation must be

followed during commissioning and operation.

Connection of I/O devices

The requirements regarding noise immunity according to EN 61000-6-2:2001 are met when

you connect an I/O device suitable for an industrial environment. I/O devices may only be

connected via shielded cables.

Summary of Contents for SIMOTION P Series











































































































































Search results

Summary of Contents for SIMOTION P Series

Reviews:

Related manuals for SIMOTION P Series

Brands by name

Popular brands

Siemens SIMOTION P Series, Manual

Search results

Summary of Contents for SIMOTION P Series

Reviews:

Related manuals for SIMOTION P Series

Brands by name

Popular brands