Application planning
4.3 Unpacking and checking the delivery
SIMOTION P350-3 and Panels
80
Manual, 05/2009
Table 4- 1
Shipping and storage conditions
Type of Condition
Permissible range
Temperature
– 20 °C to 60 °C
Maximum temperature increase
10 K/h
Relative atmospheric humidity
5 to 95% (at 25 °C)
Moisture condensation and ice formation
Not permissible
4.3
Unpacking and checking the delivery
Procedure
1.
If you are the person receiving the goods, check the packaging for damage caused
during transport.
2.
If any transport damage is present at the time of delivery, lodge a complaint at the
shipping company in charge. Have the shipper confirm the transport damage
immediately.
3.
Unpack the device.
CAUTION
Do not lie the device on its back. This will avoid any damage to an optical drive which
may be present.
4.
Keep the packaging material in case you have to transport the unit again.
NOTICE
The packaging protects the device during transport and storage. Transport the device
only in the original packaging!
5.
Please keep the enclosed documentation in a safe place. You will need the
documentation when you start up the device for the first time.
6.
Check the package contents for completeness and any visible transport damage. Check
for completeness using the enclosed "Contents of Delivery" list.
7.
Notify the delivery service in charge immediately if the packages contents are incomplete
or damaged.
WARNING
Make sure that a damaged device is not installed nor put into operation.
