Siemens SIMOTION P Series Manual Download Page 128

Page: 128 / 138

Appendix

A.2 Certificates and approvals

SIMOTION P350-3 and Panels

128

Manual, 05/2009

A.2

Certificates and approvals

DIN EN ISO 9001 certificate

The quality assurance system for our entire product process (development, production, and

marketing) is compliant with DIN EN ISO 9001.
This has been certified by the DQS (Deutsche Gesellschaft zur Zertifizierung von

Qualitätsmanagementsystemen mbH, the German society for the certification of quality

management systems).

Software license agreement

The device is shipped with software. Please observe the corresponding license agreements.

Certification for the USA, Canada and Australia

Safety

One of the following markings on a device is indicative of approval from the corresponding body:

Underwriters Laboratories (UL) acc. to standard UL 508 (IND.CONT.EQ)

Underwriters Laboratories (UL) acc. to Canadian standard C22.2 No. 142

(IND.CONT.EQ)

Underwriters Laboratories (UL) acc. to standard UL 508, Report E164110 and Canadian

standard C22.2 No. 142 (IND.CONT.EQ)

The device also fulfills the requirements for FCC.

Note
The approval or approbation is located on the type plate.

Summary of Contents for SIMOTION P Series











































































































































Search results

Summary of Contents for SIMOTION P Series

Reviews:

Related manuals for SIMOTION P Series

Brands by name

Popular brands

Siemens SIMOTION P Series, Manual

Search results

Summary of Contents for SIMOTION P Series

Reviews:

Related manuals for SIMOTION P Series

Brands by name

Popular brands