Siemens SIMOTION P Series Manual Download Page 28

Page: 28 / 138

Description

2.6 SIMOTION panel fronts

SIMOTION P350-3 and Panels

Manual, 05/2009

2.6

SIMOTION panel fronts

2.6.1

Overview of SIMOTION panel fronts

The SIMOTION panel front is a control unit for use with SIMOTION P products. It is used in

conjunction with the SIMOTION P350-3 computing unit and is designed for highly

demanding tasks in PC-based automation applications. The complete system comprising the

computer unit and panel is intended for local operation as a built-in unit in:
●

Control cabinets/consoles

●

19" cabinets / controller housings.

In addition, the panel can also be operated distributed (separate from the computer unit).

Product brief

SIMOTION panel fronts are available with various device fronts. The difference between the

variants lies in their support of operation with a membrane keyboard or operation with a

touch screen.
The keyboard and touch screen variants are available.

View

Figure 2-8

View of all SIMOTION panel fronts

Summary of Contents for SIMOTION P Series











































































































































Search results

Summary of Contents for SIMOTION P Series

Reviews:

Related manuals for SIMOTION P Series

Brands by name

Popular brands

Siemens SIMOTION P Series, Manual

Search results

Summary of Contents for SIMOTION P Series

Reviews:

Related manuals for SIMOTION P Series

Brands by name

Popular brands