Siemens SENTRON ATC6300 Manual Download Page 30

Page: 30 / 210

Product description

4.5 Display pages of the ATC6300

3KC ATC6300 transfer control device

Manual, 03/2018, L1V30535632002A-01

Expansion Modules

①

Slot 2

②

Slot 1

The Expansion Modules submenu indicates whether additional modules (e.g. communication

modules) are plugged into the ATC6300, and which ones.
It shows how the ATC is being supplied (via AC or DC) and whether the USB front interface

has been inserted.

Input/Output Status

①

Output activated

In the Input/Output Status submenu all digital inputs and outputs can be viewed. If an

input/output is active, the corresponding input or output is shown with a black background. In

addition to the permanently integrated inputs and outputs (6 inputs and 7 outputs) of the

ATC6300, the possible inputs and outputs of the expansion modules are also shown here.

Summary of Contents for SENTRON ATC6300



















































































































































































































Search results

Summary of Contents for SENTRON ATC6300

Reviews:

Siemens SENTRON ATC6300, Manual, Page: 30 / 210

Search results

Summary of Contents for SENTRON ATC6300

Reviews: