Accessories
12.1 Expansion modules
3KC ATC6300 transfer control device
184
Manual, 03/2018, L1V30535632002A-01
12.1.3.1
Technical specifications
Power supply
Supply voltage
5 V DC (supplied through the ATC6300)
Current consumption (max.)
250 mA
Power loss (max.)
1.25 W
Digital inputs
Number of digital inputs
2
Input type
Positive or negative
Input current
7 mA
Input signal - logical state "0"
Must be an open collector signal
Input signal - logical state "1"
≥
17.6 V (for PNP type)
≤
6.4 V (for NPN type)
Maximum frequency
2000 Hz (if the input is configured as a counter)
50 Hz (if input is configured as status)
Input signal delay
≥
50 ms
Auxiliary supply ter and - terminal
Auxiliary power supply at + and - 24 V DC (see tolerance graph in chapter Expansion module 2DI
Maximum current at + and -
42 mA (protected against overload and short-circuit)
Note: If the maximum current is exceeded, the protection is ena-
bled and the voltage drops
Number of terminals
2
SSR output
Output type
Solid state relays (Opto-Mosfet)
Solid state output rating (at
60 °C)
Max. 55 mA at 40 V DC / 30 V AC
Connection
Connecting terminals
Removable / plug-in
Cable cross-section (min-max)
0.2 … 1.5 mm
2
(AWG 28 ... 14)
Tightening torque
0.18 Nm (1.7 lbf-in)
Insulation
Impulse withstand voltage Uimp 4 kV
Operating frequency impulse
withstand voltage
2 kV
Ambient conditions
Operating temperature
-20 … +60 °C
Storage temperature
-30 … +80 °C
Relative humidity
< 80 % (IEC / EN 60068-2-70)
Maximum degree of pollution
2
Overvoltage category
3
Altitude of environment (max.)
≤
2000 m