manualshive.com logo in svg

Siemens SENTRON ATC6300, Manual, Page: 106 / 210

Share
Download
Siemens SENTRON ATC6300 Manual Download Page 106

Operation 

 

8.1 Operating modes of the ATC6300 

 

3KC ATC6300 transfer control device 

104

 

Manual, 03/2018, L1V30535632002A-01 

3.

 

Using the MAN key, select the line that you want to close (in this case the generator is 

located on Line 2). 

 

4.

 

Press the 

▲ and ▼ keys to start or stop the selected generator.

 

5.

 

After starting the generator, press the MAN key again to return to the manual control 

(item 2). 

The generator has now been started. 

 

6.

 

Press the ▲ key to switch back to the manual activation of the switching devices.

 

 

7.

 

Press the MAN key in order to select the switching device of Line 2 (see procedure for 

network/network application).  

The selected line is opened and closed by pressing 

▲ and ▼.

 

If the closing of one switching device is manually controlled, and provided the other is still 

closed, the mechanism first opens the other switching device and then closes the controlled 

switching device after the programmed delay time.  
If generators are being used, the generator continues running in the cooling mode after 

stopping. 

Summary of Contents for SENTRON ATC6300



















































































































































































































Reviews:

No comments