Siemens Gigaset SX303isdn User Manual Download Page 61

Page: 61 / 183

SMS (text messages)

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005

Opening the incoming message list

The

incoming message list

shows you:

◆

all received messages,

◆

messages that could not be sent despite several attempts. These messages are all

stored with an error status (page 61).

The message list is displayed, e.g. follows:

Opening with the message key
Precondition:

There is at least one

new

message in the list.

Opening with the menu

A new text message is displayed, e.g. as follows:

If the SMS memory is full and the SMS centre is unable to transfer any more, an

appropriate message will appear on the screen. Press

to confirm and delete text

messages you no longer need from the incoming and outgoing message list (see also

page 55 and page 59). The SMS centre will then re-transmit the text message.

Inbox 2/ 5

Number of new text messages in the list
Number of old, read text messages in the list

Press the message key.
If there are no new calls/messages in the other lists,

then the first

new

text message is opened

immediately. Otherwise:

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

SMS

Press the display key.

Inbox 2/ 5

If necessary, select and confirm. The incoming

message list is opened and the first

new

message is

displayed.

Open the menu.

SMS

Confirm.

Inbox 2/ 5

Select the menu item and confirm.

Total number of new SMS

Number of the text

message displayed

New textm.

1/ 2

1234567890
10.12.04

09:45

X W

Text message status:

New, Old, Error

Phone number of the sender

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands