Siemens Gigaset SX303isdn User Manual Download Page 112

Page: 112 / 183

109

System settings

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005

Otherwise, you would not be able to make some calls, e.g. callbacks from the call list.

Entering or changing the country code

Phone numbers transferred from the GSM network always include the international

country prefix (country code), even for calls within a country (e.g. +49 for Germany,

+33 for France, +39 for Italy or +43 for Austria).
A special setting is therefore necessary for the country code, if you have received a call

from the GSM network, the number has been transferred to the Phonebook or the caller

list and you then want to call back via the ISDN network from the Phonebook or the

caller list.
Factory default: Country prefix for relevant country (e.g. +49 in Germany).

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

ISDN settings

Select the menu item and confirm.

Lg.-dist. code

Select the menu item and confirm.

National : 0

Select the type of long distance prefix and open

submenu, e.g.

National : 0

Change number

Confirm.

Enter a new or changed long distance prefix and

open the submenu.

Save entry

Confirm.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

ISDN settings

Select the menu item and confirm.

Lg.-dist. code

Select the menu item and confirm.

Code: 49

Select.

Open the submenu.

Change number

Select the menu item and confirm.

Enter country code and open the menu.

Save entry

Select the menu item and confirm.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands