Siemens Gigaset SX303isdn User Manual Download Page 107

Page: 107 / 183

104

System settings

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005

By default, automatic call diversion is not set up.

The set up call diversions for which automatic diversion is set are indicated in the call

diversion list.

Setting up an internal group call group

You can make a group call from any telephone registered on the base station to all other

registered internal users (page 22).
By default, all registered users with the device type

Telephone

Neutral

are set up in

the group call group.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

ISDN settings

Select the menu item and confirm.

Auto.forwarding

Select the menu item and confirm.

MSN1:

Select MSN and open submenu, e.g.

MSN1: Anna

Enter destination number and open the submenu.

Save entry

Confirm. Automatic call diversion is activated

(

‰

= on).

Hold

down (back to idle status).

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

Setup user

Select the menu item and confirm.

Setup device

Confirm.

INT11: Int.11

Select internal number and open submenu,

e.g.

INT11:

Int.11

Hunt group

Select the menu item and confirm (

‰

= activated).

Hold

down (back to idle status).

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands