Siemens Gigaset SX303isdn User Manual Download Page 97

Page: 97 / 183

System settings

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005

System settings

The abbreviations in brackets after the titles indicate the ISDN service concerned. Some

features may only be used if they have been authorised by the network provider (there

may be an extra charge).

Changing the name for an internal user

By factory default, all internal numbers are given the names

Int.11

Int.12

, etc.,

according to their numbering. You can change these entries to suit your individual

needs.

Setting up/deleting ISDN phone numbers (MSN)

Your ISDN connection offers you two telephone lines (B channels) that you can use at

the same time. You can set up a maximum of ten individual phone numbers (MSNs) on

your base station.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

Setup user

Select the menu item and confirm.

Setup device

Select the menu item and confirm.

INT11: Int.11

Select internal number and open submenu,

e.g.

INT11:

Int.11

Name

Confirm.

Change the name and open the submenu.

Save entry

Confirm. The name is now shown in the internal list,

including when an internal call is made from this

internal number.

Since names are saved in the base station, another name can be allocated

to a terminal when registering to a different base. This makes it possible

to identify which base the terminal is currently connected to.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands