Siemens Gigaset SX303isdn User Manual Download Page 111

Page: 111 / 183

108

System settings

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005

By factory default,

Internal

is activated.

Activating/deactivating Call beats data

With

Call beats data

you can set whether a call is rejected or signalled during data

transmission.

◆

Call beats data

Off (default):

Calls received during data transmission are rejected if both B channels are being

used simultaneously. The caller will hear the busy tone.

◆

Call beats data

On:

If a call is received during data transmission, the data connection is automatically

reduced to one B channel and the call is signalled.

Changing the long distance prefix

Long distance prefixes are the first few digits required when dialling another city

(national) or to another country (international). In Germany, the factory default is:

In other countries, different long distance prefixes could be used. In this case you need

to change this setting.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

System settings

Select the menu item and confirm.

Music on hold

Select the menu item and confirm.

Internal

Select and confirm the desired setting, e.g.

Internal

(

‰

= on).

Hold

down (back to idle status).

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

ISDN settings

Select the menu item and confirm.

Call beats data

Select the menu item and confirm (

‰

= on).

For connections to other towns (national)

For connections abroad (international)

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands