Siemens Gigaset SX303isdn User Manual Download Page 20

Page: 20 / 183

Preparing the base station for use

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005

Setting the date and time:

Depending on the network provider, the date and time are adopted automatically from

the telephone network during the first outgoing call.
The display shows:

Enter time?

If the time should be displayed in 12-hour mode, you can modify the setting later

(page 86).

Show/hide answering machine (on SX353isdn):

The answering machines AM1, AM2, and AM3 are available. You can use the answering

machine when it is shown. By default, all answering machines are shown.
The display shows:

Suppress display of AM1?

Respond with

◆

YES

, if you want to hide AM1,

◆

with

, if you want to use AM1.

This sequence will then be repeated for AM2 and AM3.

Entering your phone numbers (MSNs) and names for MSNs:

Many connections allow your telephone to request the MSN automatically upon

connection.

Precondition:

You have a connection that supports this feature.

The display shows:

Find own numbers (MSN)?

◆

The Getting started wizard cannot be used simultaneously by multiple

internal users.

◆

If there is already settings data (factory default or previous settings),

this data is shown at the appropriate positions in the display and can

be modified there.

◆

To cancel the Getting started wizard, press the exit menu key and

hold. All changes you have already saved using

Save entry

§§OK§§

are

retained. The base station returns to idle status.

◆

To skip a setting, press the display key

§NO§

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to set the date and time.

Enter the date (6-digit) and time (4-digit in 24-hour

mode) in series, e.g. 101204 0945 for 12/10/04

9:45 a.m..

Press the display key to open the submenu.

Save entry

Select the menu item and confirm.

An answering machine can only be hidden if there are no messages/

memos stored in it (page 77).

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands