Siemens Gigaset SX303isdn User Manual Download Page 102

Page: 102 / 183

System settings

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005

Diverting calls

Diverting calls internally

By factory default, internal call divert is deactivated.

Setting up a destination

Activating/deactivating internal call diversion
Precondition:

Internal call diversion can only be activated if a destination has been set

up.

To make this function easier to use, you can also set one of the function

keys accordingly (page 117).

◆

Only one destination can be selected for internal call diversion.

◆

Only one-level call diversion is supported: If the subscriber to which

you divert your calls has activated their own call diversion, this is no

longer effective. The diverted call is always signalled at the subscriber

you diverted it to.

Open the menu.

Set base

Select the menu item and confirm.

Forward. base

Select the menu item and confirm.

Enter system PIN if required (page 91).

Forward. dest.

Select the menu item and confirm.

INT11: Int.11

Select internal number, e.g.

INT11:

Int.11

(

‰

= activated).

Open the menu.

Set base

Select the menu item and confirm.

Int. call forw.

Select the menu item and confirm.

Enter system PIN if required (page 91).

either ...

Activate:

Activate?

Confirm.

or ...

Deactivate:

Deactivate?

Confirm.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands