Siemens Gigaset SX303isdn User Manual Download Page 142

Page: 142 / 183

139

Operating when connected to a PABX

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / pabx.fm / 14.11.2005

Activating/deactivating the keypad during a call

In addition to the ongoing settings described above, you can also switch over

temporarily to the keypad.
The setting is only applicable to the current external call and is automatically

deactivated after the call is ended.
During a call:

Activating the keypad for the next connection

All dialling characters (

0–9, *, #

) will be sent as a string of keypad characters with the

next connection (dial and call). In the connection status, the keypad is retained and is

not automatically switched over to tone dialling (DTMF).

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

System settings

Select the menu item and confirm.

Spec. function

Select the menu item and confirm.

Dial properties

Select the menu item and confirm.

Standard dial

Select the setting and confirm, e.g.

Standard dial

(

‰

= activated).

Open the menu.

either ...

Activate the keypad:

Keypad on?

Select the menu item and confirm.

Enter the keypad code.

or ...

Deactivate the keypad:

Keypad off?

Select the menu item and confirm.

Open the menu.

Set base

Select the menu item and confirm.

Call preparat.

Select the menu item and confirm.

Temp. keypad

Select the menu item and confirm (

‰

= activated).

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands