Siemens Gigaset SX303isdn User Manual Download Page 155

Page: 155 / 183

152

Appendix

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / appendix.fm / 17.11.2005

Creating and editing text

You can create and edit text in a number of ways:

◆

The cursor is controlled with

u v t s

◆

Characters (to the left of the cursor) are deleted with

◆

Characters are added to the left of the cursor (page 11).

◆

To switch from upper case to lower case letters, press the

key before you enter

the letter. Pressing the

key again switches from lower case to upper case.

◆

The first letter of the name of Phonebook entries is automatically capitalised,

followed by lower case letters.

◆

Each key is assigned several characters (see table). If you

hold down

a key or

press

it several times in quick succession

, the characters for the corresponding key are

displayed in turn at the cursor position. When you release the key, the character

currently displayed is inserted.

Order of Phonebook entries

As a rule, entries in the Phonebook are arranged in alphabetical order, although blank

spaces and numerals (digits) take first priority. The

order in which entries occur

is as

follows:
1. Space (shown here as

)

2. Digits (0–9)
3. Letters (alphabetical)
4. Other characters
If you want to circumvent the alphabetical order of the entries in the Phonebook, insert

a space before the name. This entry then goes to the first position (example: "

Carla").

You can also number the entries with digits (e.g. "1Jane", "2Mary", "3John"). Names

prefixed with a star (e.g. "*Jane") appear at the end of the Phonebook.

Guarantee Certificate United Kingdom

Without prejudice to any claim the user (customer) may have in relation to the dealer or

retailer, the customer shall be granted a manufacturer's Guarantee under the conditions

set out below:

◆

In the case of new devices and their components exhibiting defects resulting from

manufacturing and/or material faults within 24 months of purchase, Siemens shall,

at its own option and free of charge, either replace the device with another device

reflecting the current state of the art, or repair the said device. In respect of parts sub-

ject to wear and tear (including but not limited to, batteries, keypads, casing), this

warranty shall be valid for six months from the date of purchase.

◆

This Guarantee shall be invalid if the device defect is attributable to improper treat-

ment and/or failure to comply with information contained in the user manuals.

◆

This Guarantee shall not apply to or extend to services performed by the authorised

dealer or the customer themselves (e. g. installation, configuration, software down-

loads). User manuals and any software supplied on a separate data medium shall be

excluded from the Guarantee.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands