Siemens Gigaset SX303isdn User Manual Download Page 15

Page: 15 / 183

Preparing the base station for use

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005

Idle status

Display in idle status (example)

Reverting to idle status from anywhere in the menu:

◆

Press the exit menu key for around 1 second or

◆

do not press any key: The display

automatically

reverts to idle status after 1 minute.

Changes which you have not confirmed or saved by pressing

YES

Store

Send

or with

Store

will be lost.

Menu operation, with "Setting Handsfree Volume" as an example

Operating the base station from the handset

The SX303isdn and SX353isdn or CX203isdn und CX253isdn base stations support the

S44, S1, SL1, C34, C32, C1 and C2 handsets. In conjunction with a Gigaset handset, your

base station offers you a variety of features. You can use a particular range of these

features depending on the handset you are using.
You can find operating instructions for your handsets on the enclosed CD or on the

Internet at www.siemens.com/gigaset.
Using the example of

"Assigning a ringtone melody to an MSN"

, operation of the base

station from the following handsets is described below:

◆

S44,

◆

S1 and SL1,

◆

C34,

◆

C1, C2 and C32.

The meaning of the symbols used and information about operation of your handset can

be found in the corresponding operating instructions.

<1>

Internal 10

10.12.04

09:45

INT SMS

Gigaset SX303isdn

<1>

AM:

Internal 10

10.12.04

09:45

INT SMS

Gigaset SX353isdn

The number in pointed brackets <>

indicates how many telephone

lines are currently in use: <1> or

<2>.

Press the enter menu key. The menu opens.

Press the display key until

Audio

is marked in the display (by the

frame) and then use the display key

to confirm.

Press the display key until

Vol.Loudspeaker

is marked in the display

(by the frame) and then use the display key

to confirm.

u v

Press the display keys to select the volume (1-5).

Now press the display key to confirm the setting.

Hold

down the exit menu key to return to idle status.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands