Siemens Gigaset SX303isdn User Manual Download Page 110

Page: 110 / 183

107

System settings

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005

Initiating an enquiry call see page 29 or page 30.

Setting up the waiting melody

An external caller hears the set waiting melody when the connection is on hold in the

base station (internal) (page 106). An external party whose connection is on hold in the

telephone exchange (external), and an internal user who is on hold, will not hear a

waiting melody.
The following settings can be selected:

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

ISDN settings

Select the menu item and confirm.

either ...

Set

Int. enq. call

Select the menu item and confirm (

‰

= activated).

or ...

Set

Ext. enq. call

Select the menu item and confirm (

‰

= activated).

Hold

down (back to idle status).

Internal

The party on hold hears the waiting melody of

the base.

External

The waiting melody is imported from an external

device. To do this the analogue connection must be

configured as

Ext. music/hold

(page 131). If the

analogue connection is configured differently, the

setting

External

is not available.

Please observe the legal regulations.

Off

When the waiting melody is deactivated, a setting

cannot be made.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands