Siemens Gigaset SX303isdn User Manual Download Page 134

Page: 134 / 183

131

Operating with other devices

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005

Connecting an answering machine

If you are operating an answering machine (or a telephone with integrated answering

machine) on the analogue connection, the device type setting

Answ. machine

recommended. This setting allows the answering machine to pick up a call (see

Page 134).
If a telephone with integrated answering machine is connected and you also want to

use the telephone to make internal calls, automatic line seizure for the associated

analogue connection must be deactivated, (page 132). All numbers must then be

prefixed by a zero for external calls.
The device type setting

Answ. machine

does not support

Call waiting

and

Hunt

group

The "Neutral

" setting

This setting is suitable for operation of a telephone, fax and modem. For smooth fax

operation, regardless of the settings of the remote terminal, the device type setting

Neutral

is recommended (page 130).

The device type setting

Neutral

does not support

Call waiting

Importing a waiting melody from an external device

This device type setting is a precondition for importing the waiting melody from an

external device. The

External

option is only available when setting up the waiting

melody if an analogue connection has been configured as

Ext. music/hold

(page 107).

No device connected

For each analogue connection with no device connected to it, the device type must be

set to

No function

in order to prevent malfunctioning of the ISDN functions

Reject all

(page 98)and (pag e 97)

Busy on busy

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands