Siemens Gigaset SX303isdn User Manual Download Page 22

Page: 22 / 183

Preparing the base station for use

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005

The receive MSN is used to answer incoming calls. The MSNs allocated to your ISDN

connection can be allocated to various end devices according to your preferences. You

can assign an end device multiple receive MSNs.

This procedure is repeated for all devices registered on your telephone (handsets, data

modules etc.) and (on CX253SX353isdn) for the integrated answering machine.

Setting the send MSN:

The display shows:

Set outgoing MSN?

Each internal user can be assigned exactly one of the available send MSNs. It is identified

to the person called and the network provider bills the call charges to this MSN. Each

end device can be assigned exactly one of the available send MSNs.

This process is repeated for all handsets registered on your base station.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to confirm the prompt.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to confirm the

Set allocation

Internal 11?

prompt.

The list of entered MSNs is displayed.

MSN1:12345678

Select the MSN which should be assigned to this end

device, and confirm.
Repeat this sequence for all MSNs which should be

assigned to this end device as a receive MSN

(

‰

= on).

Briefly

press the exit menu key, to complete the

assignment for this terminal.

When setting the receive MSN for an answering machine, only the MSNs

are offered in the MSN list which have not yet been assigned to another

answering machine.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to confirm the prompt.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to confirm the

Set allocation

Internal 11?

prompt.

The list of entered MSNs is displayed.

MSN1:12345678

Select the MSN which should be assigned to this end

device, and confirm (

‰

= on).

Press the exit menu key to end the assignment for

the device.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands