Siemens Gigaset SX303isdn User Manual Download Page 94

Page: 94 / 183

Security settings

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / security.fm / 14.11.2005

Security settings

Changing the system PIN

You can protect the following settings against unauthorised access using the system PIN

(Personal Identification Number):

◆

Call charges and settings

◆

Internal and external call diversion

◆

SMS service centres, subscriber configurations, security, ISDN and system settings

◆

Getting started wizard

The system PIN is also necessary to register Bluetooth devices, e.g. for GSM telephones

(page 127) and PCs (page 127).
The system PIN will not work with the number 0000.
When supplied, the system PIN is preconfigured to 0000.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Providing you choose a number other than 0000:

Enter PIN and confirm.

Security

Confirm.

Change PIN

Select the menu item and confirm.

Enter new system PIN (up to 8 digits, 0 to 9) and

confirm.

Repeat the new system PIN and confirm.

Hold

down (back to idle status).

Memorise the new system PIN! If you forget it, the device will require

technical intervention. If this happens, contact the Siemens Hotline.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands