Siemens Gigaset SX303isdn User Manual Download Page 128

Page: 128 / 183

125

Operating with other devices

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005

Registering a Gigaset 2000 C handset

Registering a Gigaset 2000S / Gigaset 1000 C/S handset

For the registration procedure described below:

You can register a maximum of four other handsets (e.g. Gigaset 2000S, GAP handsets)

or wireless devices (e.g. Gigaset 1000 TAE, STA). Register these devices first.

Registering a Gigaset 2000S handset

The lowest free internal number is assigned. It is not possible to select a free internal

number.

Registering a Gigaset 1000 C/S handset

For the registration procedures, please refer to the corresponding operating

instructions.

Press to turn on the handset.

Open the menu.

Settings

Select the menu item and confirm.

Registration

Select the menu item and confirm.

Station1

Select base (1-4) and confirm.
Open the submenu.

Registration

Select the menu item and confirm.

Enter the system PIN of the base (factory default:

0000) and confirm.

INT11: Int.11

Select internal number and confirm, e.g.

INT11:

Int.11

. Successful registration is confirmed on the

display.

Press

(off).

o h

Simultaneously press the number of the base station

and

(on).

o #

Enter the system code and press the hash key.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands