Siemens Gigaset SX303isdn User Manual Download Page 129

Page: 129 / 183

126

Operating with other devices

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005

De-registering handsets

Registering Bluetooth devices

The following Bluetooth devices can be registered:

◆

GSM mobile phone

◆

Bluetooth headset

◆

Three PCs/PDAs

Registering a GSM telephone and PCs/PDAs requires actions on the base station and on

the Bluetooth devices. Note the system PIN of the base station and prepare the

Bluetooth devices for registration (e.g. start PC and start software for setting up the

Bluetooth connection).

Prepare base station for registration (for GSM mobile phone and

PCs/PDAs)

Your base station is then ready for registration for

one

minute. Now register your

device. If you do not register your device within this time, the registration process is

terminated and you must prepare the base station for registration again.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

Setup user

Select the menu item and confirm.

De-reg. device

Select the menu item and confirm.

INT16: Int.16

Select the handset that you wish to de-register and

confirm, e.g.

INT16:

Int.16

Hold

down. Return to the idle state.

It is not possible to re-register a Bluetooth device that is already

registered. You need to de-register the Bluetooth device first.

Open the menu.

Bluetooth

Select the menu item and confirm.

Reg. BTdevice

Select the menu item and confirm.

A list of Bluetooth devices is displayed.

GSM phone

Select the desired device and confirm,

e.g.

GSM phone

The display shows

Registration proced.running

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands