Siemens Gigaset SX303isdn User Manual Download Page 27

Page: 27 / 183

Making calls

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / telephony.fm / 14.11.2005

Withholding phone number identification

If you do not wish your phone number to be revealed to the person you are speaking

to you can stop your number being identified. You can withhold identification of your

phone number specifically for the next call or else for all calls. With the permanent

setting, the phone number is withheld from the other caller both for outgoing calls

(CLIR) and for incoming calls (COLR).

Withholding identification of the phone number for the next call only:

Withholding or permitting identification of your phone number for all calls:

When the phone is supplied

Withhold no.

is not activated.

Open the menu.

Set base

Select the menu item and confirm.

Call preparat.

Select the menu item and confirm.

Temp.withhold

Select the menu item and confirm (

‰

= activated).

Hold

down (back to idle status).

After the call, the setting is reset again. Your phone number will be

identified to your next caller. When you call the selected phone number

from the last number redial list again, this call is also not anonymous.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

ISDN settings

Select the menu item and confirm.

Withhold no.

Select the menu item and confirm (

‰

= activated).

Hold

down (back to idle status).

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands