106
System settings
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005
Activating/deactivating call waiting – CW
This function can be set up separately for each user. When call waiting is activated the
caller will hear the ringing tone if you are already making a call. This call is indicated
both acoustically and visually on your base station display.
When call waiting is deactivated, the caller will hear the ringing tone if you are already
making a call
and
other phones are assigned to this MSN.
When call waiting is deactivated, the caller will hear the busy tone if you are already
making a call
and
yours is the only phone assigned to this MSN.
The function is activated when the phone is supplied. Taking a waiting external call see
Setting an external/internal enquiry call
Your ISDN connection offers you two telephone lines (B channels) that you can use at
the same time.
You can set up your base station so that:
◆
when an enquiry call is made to another external party during an external call, the
call is put on hold in the telephone exchange so that your second ISDN line remains
free.
◆
when an enquiry call is made to another external party during an external call, the
call is put on hold in your base station; in this case both ISDN lines are engaged.
By factory default,
Ext. enq. call
is activated.
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 91).
s
Setup user
Select the menu item and confirm.
s
Setup device
Select the menu item and confirm.
s
INT11: Int.11
W
Select internal number and open submenu,
e.g.
INT11:
Int.11
.
s
Call waiting
Select the menu item and confirm (
‰
= activated).
j
Hold
down (back to idle status).
OK
OK
OK
OK
OK
OK
i
If
Int. enq. call
is set and it is not possible to place a call on hold in the
telephone exchange, the call is automatically placed on hold internally in
the device itself.
