Siemens Gigaset SX303isdn User Manual Download Page 47

Page: 47 / 183

Using the Phonebook and other lists

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / directories.fm / 14.11.2005

Changing the caller's phone number

Open the list of missed or answered calls (page 42).

Now

Adding an entry to the Phonebook from the caller list

Open the list of missed or answered calls (page 42).

Now

Deleting an entry from the caller list

Open the list of missed or answered calls (page 42).

Now

Select entry and open the submenu.

Change number

Select the menu item and confirm. You will now see

the number.

Change the number.

Press the display key to open the submenu.

Save entry

Confirm.

Select entry and open the submenu.

Copy to dir.

Select the menu item and confirm.

Enter names in the line marked by

<Name>

(for details of entering text see page 151).

Press the display key to open the submenu.

Save entry

Confirm. The entry is stored.

Hold

down (back to idle status).

either ...

Delete a single entry:

Select entry and open the submenu.

Delete entry

Select the menu item and confirm. The entry is

deleted.

or ...

Delete all entries:

Open the submenu.

Delete list

Select the menu item and confirm.

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Confirm the prompt.

Hold

down (back to idle status).

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Siemens Gigaset SX303isdn, User Manual, Page: 47 / 183

Search results

Summary of Contents for Gigaset SX303isdn

Reviews: