Siemens Gigaset SX303isdn User Manual Download Page 66

Page: 66 / 183

Operating the answering machine (on SX353isdn)

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005

Operating the answering machine
(on SX353isdn)

The Gigaset SX353isdn has three answering machines (AM1, AM2, AM3), which can be

used independently of each other. You can operate the answering machines either

directly via the base station, a registered handset or by remote control (internal or

external call to the answering machine, see page 72).
Answering machines are not assigned an MSN (factory default).

◆

AM1 answers all calls.

◆

Each answering machine can be set, operated and played back from each handset/

terminal.

One or more MSNs are assigned to each answering machine:

Each answering machine can only be set and played back using handsets/terminals with

the same receive MSN.

Exception: If a receive MSN is exclusively assigned to an answering machine, then this

answering machine can be used from all internal users.

The date and time of arrival of each message is logged if you have previously set this

function (page 86).
You can hide answering machines you do not wish to use, see page 77.
Definitions of terms used below:

Selecting an answering machine

The list only contains the shown answering machines. If only one answering machine

is shown, the list is skipped.

If an answering machine is being used by a user (directly or via remote

operation), no other user can access the answering machine during this

time.

Message

Message that a caller leaves on the answering machine.

Memos

"Spoken notes" that you can leave on the answering machine for

members of your family or office colleagues, for example.

AM m

ode

Answer and record or announce only.

Answer and record

mode

The caller hears the announcement and may then leave a message.

Announce only mode The caller hears the announcement but cannot leave a message.

Open the menu.

Answering mach.

Select the menu item and confirm.

AM1

If necessary, select answering machine and confirm,

e.g.

AM1

If AM lock is set (page 80): enter the answering

machine PIN and confirm.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands