background image

56

SMS (text messages)

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005

Deleting the entire outgoing message list

This function deletes all the messages in the outgoing message list.

Precondition:

 You have opened the outgoing message list (page 55).

Sending or editing text messages in the outgoing message list

Precondition:

 You have opened a text message in the outgoing message list to read 

(page 55).

You can now send the message as described on page 54. 

Sending a text message to an e-mail address

You ca send a text message to an e-mail address. To do this you should write the 

recipient's e-mail address at the start of the text message and send this text message to 

the call number of the e-mail service of your SMS send centre. 

Entering the e-mail address at the start of the text message

Enter the recipient's e-mail address at the start of your text message. Use a space to 

separate the e-mail address from the message text or insert a colon (for other 

providers). 
Enter the "@" character using the hash key 

R

 (press x 2), the colon using the 

Q

 key 

(press x8), and the space with 

1

 (press once). 

Use 

W

Store 

 to save temporarily.

Precondition: 

You are writing a text message (page 53) and the input field is open. 

W

Open the submenu.

s

Delete list

 

Confirm.

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to confirm the prompt.

j

 

Hold

 down (back to idle status). 

OK

W

Open the submenu.

either ...

Write and send a new text message:

Write message

 

Confirm. The input field is opened (page 53). 

You can write a new text message. 

or ...

Edit and send a stored text message:

s

Use text

 

Select the menu item and confirm. The input field is 

opened with the contents of the stored text 

message. You can edit the text. 

OK

OK

OK

 

~

Enter the full e-mail address and end it with a space 

or a colon.

Summary of Contents for Gigaset SX303isdn
























































































































































































Reviews: