Siemens Gigaset SX303isdn User Manual Download Page 58

Page: 58 / 183

SMS (text messages)

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005

Opening the outgoing message list

The

outgoing message list

shows you:

◆

Text messages which you saved

before you sent them

(page 54).

◆

Text messages you could not send, e.g. you were interrupted by an incoming call

while you were writing the message.

However, the list only shows text messages that are assigned to the same send MSN as

the base station.
These messages are stored until you delete them.

Reading and deleting text messages in the outgoing message list

Precondition:

You have opened the outgoing message list (page 55).

Open the menu.

SMS

Confirm.

Outbox 4

Select the menu item and confirm. The figure shown

indicates how many text messages are stored in the

outgoing message list.

Use

Z Y

to scroll through the list.

The total number of SMS saved

in the outgoing message list

Number of the text message

displayed

Saved 2/ 4

10.12.04

09:45

{ W

When the memory is full, you are prompted to delete messages

(page 52).

Select SMS.

Open the submenu.

either ...

Read SMS:

Read textmessage

Confirm. Use

to view the continuation of the text

message in the display.

or ...

Delete SMS:

Delete textmess.

Select the menu item and confirm.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands