Siemens Gigaset SX303isdn User Manual Download Page 39

Page: 39 / 183

Using the Phonebook and other lists

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / directories.fm / 14.11.2005

Using the Phonebook and other lists

Phonebook and speed dial list

You can store up to 200 phone numbers in the Phonebook. You can store up to

10 phone numbers in the speed dial list.
The

Phonebook

makes dialling easier for you. You open the Phonebook in idle status

using the

key.

The

speed dial list

is a special Phonebook, where you can store particularly important

phone numbers, e.g. private phone numbers, prefixes for network providers (known as

"Call-by-Call numbers") etc. You open the speed dial list using the

key.

You create an individual Phonebook and speed dial list for your base station. If you want

the lists/individual entries to be available to handsets, you can send the list/entries to

those handsets (page 39).
The speed dial list is operated in just the same way as the Phonebook, except for the way

in which entries are stored.

Storing a telephone number in the Phonebook

◆

Please refer to the

Character Set Chart

(page 151) to see how to

enter text correctly.

◆

You can enter up to 32 digits for a number and up to 16 letters for a

name.

Open the Phonebook.

Open the menu.

New entry

Select the menu item and confirm.

Create an entry

Enter name.

s ~

Scroll to the next line and enter the name.

Press display key to open menu.

Save entry

Select the menu item and confirm. The entry is

stored.

Hold

down (back to idle status).

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands