Siemens Gigaset SX303isdn User Manual Download Page 157

Page: 157 / 183

154

Appendix

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / appendix.fm / 17.11.2005

loads). User manuals and any software supplied on a separate data medium shall be

excluded from the Guarantee.

◆

The purchase receipt, together with the date of purchase, shall be required as evi-

dence for invoking the Guarantee. Claims under the Guarantee must be submitted

within two months of the Guarantee default becoming evident.

◆

Ownership of devices or components replaced by and returned to Siemens shall vest

in Siemens.

◆

This Guarantee shall apply to new devices purchased in the European Union. For

Products sold in the Republic of Ireland the Guarantee is issued by Siemens Home and

Office Communication Devices GmbH & Co. KG, Schlavenhorst 66, D-46395 Bocholt,

Germany.

◆

Any other claims resulting out of or in connection with the device shall be excluded

from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a

Customers Statutory Rights, nor the manufacturer’s liability for death or personal

injury resulting from its negligence.

◆

The duration of the Guarantee shall not be extended by services rendered under the

terms of the Guarantee.

◆

Insofar as no Guarantee default exists, Siemens reserves the right to charge the cus-

tomer for replacement or repair.

◆

The above provisions does not imply a change in the burden of proof to the detriment

of the customer.

To invoke this Guarantee, please contact the Siemens helpdesk on 1850 777 277. This

number is also to be found in the accompanying user guide.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands