Siemens Gigaset SX303isdn User Manual Download Page 80

Page: 80 / 183

Setting the answering machine (on SX353isdn)

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005

Hiding/showing an answering machine

If you only want to use one or two answering machines for your connection, you can

hide the other answering machine(s) from all displays and menus.
When hidden there must be no messages or memos remaining in the answering

machine:

◆

If there are new messages/memos you have not yet played back on the answering

machine, you will be notified when you try to hide it. The answering machine will

continue to be

shown

◆

If, when you wish to hide an answering machine, it still contains old messages/

memos that have already been played back, you will be asked if you wish to delete

the old recordings. The answering machine is only hidden if you confirm with

YES

When an activated answering machine is hidden it is deactivated. When it is set to show

again, the answering machine returns to the status it had before it was hidden.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Setup user

Select the menu item and confirm.

Setup device

Confirm. The list of internal numbers is displayed.

Select the internal numbers for the answering

machine (

INT 91

INT 92

INT 93

Open the submenu.

either ...

Hide answering machine:

Hide AM?

Select the menu item and confirm.

or ...

Show answering machine:

Show AM?

Select the menu item and confirm.

Hold

down (back to idle status).

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands