![background image](http://html.mh-extra.com/html/sharp/up-5300/up-5300_service-manual_373328074.webp)
CHAPTER 6. BIOS SETUP UTILITY
1. Outline
In the Up-5300, there is an utility that rewrites minimum required
setup information at the system bootup which resides in ROM-BIOS.
Setup data is undefined at the first system startup, so setup must be
done Basically, system operation can be done just by doing initial
setting in setup.
Also, the BIOS in UP-5300 automatically detects memory size / HDD,
which makes no need for running setup again after changing
hardware (expanding memory, changing HDD, etc).
2. Starting Procedure
There are 2 ways of starting setup, changing system SW and con-
necting PS/2 type full keyboard. Setup started by each procedure will
be as follows.
Procedure for running setup
Setup contents
Start with system SW
•
Setup data initialization
Start with full keyboard
•
Setup data initialization
•
Running setup in menu format
1) Starting setup by changing system SW
Setup data initialization will be processed when system is started with
system SW (DSW-6) turned on.
Following shows the flow of this procedure.
2) Starting setup with full keyboard
Starting and operating setup with full keyboard will require PS/2 type
full keyboard. Only the num-pad is used to enter setup.
Procedure for starting setup is as follows.
1
Start the system.
2
Press the following keys according to the type setup desired while
SETUP Available message appears on screen.
•
Do setup initialization
On num-pad, press 9 and period at same time.
Buzzer will beep twice.
•
Starting setup in menu format
On num-pad, press 7 and period at same time.
After 1 long beep, menu will be displayed.
3
The system will reset automatically after setup is terminated.
3. Setup Outline in Menu Format
The setup in menu format is not required during normal operation.
Use only when checking the contents of setup during maintenance, or
modifying setup contents required due to system operation.
1) Key assignments
Following num-pad keys are used during operation of setup in menu
format.
Key used
Functions
5
Display help
3 (Pg Dn)
Change setting (reverse)
9 (Pg Up)
Change setting (forward)
7 (Home)
Initialize all category displayed
1 (End)
Return to previous value
8 (
↑
)
Change category (up)
2 (
↓
)
Change category (down)
4 (
←
)
Change menu (left)
6 (
→
)
Change menu (right)
. (Del)
Select submenu, confirm, execute
0 (Ins)
End, return from submenu
Setup in menu format displays key assignment described in lower 2
lines. There is a case that [Continue] and [OK] is displayed while help
and in some settings. In this case, press arbitrary key to go to next
step. Press period when [Press Enter] is displayed.
4. Menu Tree
Setup menu tree is as follows.
START
Turn OFF
the power switch
Change the system SW
(DSW-6) to ON position
Turn ON
the power switch
Buzzer beeps 3 times
Message displays
notifying
initialization
complete
Turn OFF
the power switch
Change the system SW
(DSW-6) to OFF
position
END
"CMOS Initialize Complete Please-
Restart." Message displays
Setup data initialization complete
DSW-6
Function
CMOS initialize
OFF(value=1)
ON(value=0)
Not initialize
Initialize
ON
OFF
ON
1
2
3
4
5
6
7
8
Main
Exut
IDE aDAPTER 0 Master
IDE aDAPTER 0 Slave
Syatem Time
Syatem Data
Discard Change & Exit
Save Change & Exit
Get Default Value
Load Previous Values
Save Change
[MENU]
[SUB MENU]
[CATEGORY]
6 – 1
Summary of Contents for UP-5300
