![background image](http://html.mh-extra.com/html/sharp/up-5300/up-5300_service-manual_373328029.webp)
•
Test Start ? [Yes/No]
Selection is made to execute the test or not.
1
Checking content
In the cylinder range set above, the sequential seek is executed
for every 1 track. When the seek test in the set range is completed
(in the direction of 0
→
inmost cylinder), it is counted as 1 pass. In
case of an error during the above test, a retry is repeated up to
the set number of retries. Every time an error occurs by executing
retry up to the retry number and error logging is performed. Log-
ging is made for HD and DRAM.
When an "Error stop" is set in the test conditions setting, and an
error occurs during the above test, the error display is made and
the test is stopped. Press the space bar to resume the test.
When "Continue" is set, even if an error occurs, the error display
is made but the test is not stopped.
When "1 Pass" is set, a series of tests is made only once and the
test is stopped.
2
Display
Sequential Seek test execution screen
Select the desired items at the position of @. (@ is not displayed
on the screen.)
On the above screen, when the pass count is counted up (when
the point is counted up to the upper limit set in the cylinder range
setting, the pass count is counted up by 1.), and if the error
counter of all error items are not counted up (remaining as
00000), the test is OK.
When the space bar is pressed during the test, the test is inter-
rupted.
When the space bar is pressed during interruption of the test, the
test is started.
3
Terminating method
Press the Esc key during execution of the test or during interrup-
tion of the test to terminate the test and return to the above menu
screen.
3) Random Seek Test
[Test condition setting]
Same as the above sequential read.
However, execution of the test by 1 Pass means execution of random
seek through the set cylinder range.
1
Checking content
The random seek is executed for every one track in the cylinder
range set previously.
When the seek test is completed in the set range, it is counted as
1 pass.
In case of an error during the above test, a retry is repeated up to
the set number of retries. Every time an error occurs a retry is
performed up to the set number of retries and, error logging is
made. Logging is made for HD and DRAM.
When the "Error Stop" is set in the test condition setting, and an
error occurs during the above test, the error display is shown and
the test is interrupted. Press the space key to resume the test.
When the "Continue" is set, even if an error occurs, the error
display is made but the test is not stopped.
When "1 Pass" is set, a series of tests is made only once and the
test is stopped.
2
Display
Same as the above sequential read, however the following con-
tents are different.
The test Point is changed at random in the range of 000
∼
XXX
(cylinder range set value).
Each point is tested once, and the pass count is added by one
with XXX times.
3
Terminating method
Press the Esc key during execution of the test or during interrup-
tion of the test to terminate the test and return to the above menu
screen.
4) Seek & Read Test
[Test condition setting]
Same as the above sequential read. The following setting is addition-
ally required.
•
Sector count [0
∼
final sector]
The sector range to be tested is set.
1
Checking content
The sequential read for every one track is executed in the cylinder
range and the sector range set above. (in the direction of 0
→
inmost cylinder)
When the read test is completed in the set range, it is counted as
1 pass.
Before seeking, however, seek is made the previous cylinder and
the following cylinder.
(Head movement)
When track N is read, the head moves as follows:
At
2
and
4
, read is executed.
In case of an error during the above test, a retry is repeated up to
the set number of retries. Every time an error occurs a retry is
performed up to the set number of retries and, error logging is
made. Logging is made for HD and DRAM.
When the "Error Stop" is set in the test condition setting, and an
error occurs during the above test, the error display is shown and
the test is interrupted. Press the space key to resume the test.
When the "Continue" is set, even if an error occurs, the error
display is made but the test is not stopped.
When "1 Pass" is set, a series of tests is made only once and the
test is stopped.
2
Display
Select the desired items at the position of @. (@ is not displayed
on the screen.)
Sequential Seek test
@Cylinder range ?
[000 XXX] = 000-XXX
(XXX is displayed by checking the
inmost cylinder.)
@Retry count ?
[0 4] = 0
@[Errorstop continue 1pass]
@Test Start ? [Yes No]
Pass count = XXXXX
Test Point = CCC (Cylinder)
ESC : Exit SPACE : Stop or Start
Error Kinds
Drive not ready XXXX
Bad controller XXXX
Compare error XXXX
Details of error are displayed.
S
1
Next
2
3
4
N-1
N-1
S+1
S-1
N
0 cylinder
The previous
cylinder
Cylinder to be tested
The next
cylinder
Inmost
cylinder
Seek & Read test
@Cylinder range ?
[000 XXX] = 000-XXX
(XXX is displayed by checking the
inmost cylinder.)
@Sector count ?
[0 XX] = XX
(XXX is displayed by checking the
inmost cylinder.)
@Retry count ?
[0 4] = 0
@[Errorstop continue 1pass]
@Test Start ? [Yes No]
Pass count = XXXXX
Test Point = CCC : HH : SS (Cylinder: head; sector)
ESC : Exit SPACE : Stop or Start
Error Kinds
Drive not ready XXXX
Bad controller XXXX
Compare error XXXX
Details of error are displayed.
4 – 13
Summary of Contents for UP-5300
