manualshive.com logo in svg

Sharp MX-2301N, Operation Manual, Page: 93 / 817

Share
Download
Sharp MX-2301N Operation Manual Download Page 93

1-52

BEFORE USING THE MACHINE

Contents

REPLACING THE TONER CARTRIDGES

Be sure to replace the toner cartridge when the message "Change the toner cartridge." appears.

In copy mode

• If any one of the toner colours runs out (including black toner), colour printing will not be possible. If Y, M, or C toner runs 

out but Bk toner remains, black and white printing will still be possible.

• Be sure to install 4 toner cartridges (Y/M/C/Bk).

Ready to scan for copy.

(                 

Toner supply is low.

)

Change the toner cartridge.

(                )

Ready to scan for copy.

(               )

Colours that are running low or have run out of toner are indicated in (

).

: Yellow toner, 

: Magenta toner, 

: Cyan toner, 

: Black toner

Replace the toner cartridges of the indicated colours.

Y

M

C

Bk

If you continue to use the machine without replacing the cartridge, the following message will appear when the toner runs out.

When the message appears in the message display, replace the toner cartridge for the indicated colour.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments