manualshive.com logo in svg

Sharp MX-2301N, Operation Manual, Page: 517 / 817

Share
Download
Sharp MX-2301N Operation Manual Download Page 517

5-69

SCANNER/INTERNET FAX

Contents

3

Select the special modes.

(1) Touch the [Mode Switch] key and select the desired mode.

(2) Touch the [Job Detail Settings] key.

(3) Touch the [Special Modes] key.

(4) Touch the [Erase] key.

☞

SPECIAL MODES

 (page 5-64)

4

Select the erase settings.

(1) Touch the desired erase mode.

Select one of the 4 erase modes.
Touch the [Side Erase] key to open the following screen.

Touch the checkbox of the edge that you wish to erase 
and make sure that a checkmark (

) appears.

When performing 2-sided scanning, set the erase edge on 
the reverse side.

• If you touch the [Same Side as Side 1] key, the edge in 

the same position as on the front side will be erased.

• If you touch the [Different Side from Side 1], the edge in 

the position opposite to the erased edge on the front 
side will be erased.

When you have completed the settings, touch the [OK] key.

(2) Set the erasure width with the 

 keys.

0 mm to 20 mm (0" to 1") can be entered.
You can also directly touch a numeric display key to 
change the setting with the numeric keys.

(3) Touch the [OK] key.

Erase

Special Modes

Edge

Erase

Edge+Centre

Erase

Edge

Cancel

OK

OK

(0~20)
mm

10

(1)

(2)

(3)

Special Modes

Erase

Centre

Erase

OK

OK

Cancel

Centre

Side Erase

(0~20)
mm

10

(1)

(2)

(3)

Different Side

from Side 1

Up

Erase position

for Original Side 

Same Side as

Side 1

Cancel

Side Erase

Left

Right

Down

OK

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments