Sharp MX-2301N Operation Manual Download Page 562

Page: 562 / 817

5-114

SCANNER/INTERNET FAX

Contents

[At the machine]

Touch the [Exit] key in the touch panel.

Touch the [Yes] key.

This machine is in the PC scan mode.
Do not remove the original.

Scanner IP address:250.160.102.106

Exit

PC scan in progress.
Finish PC scan mode?

Yes

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2301N, Operation Manual, Page: 562 / 817

Search results

Summary of Contents for MX-2301N

Reviews: