manualshive.com logo in svg

Sharp MX-2301N, Operation Manual, Page: 120 / 817

Share
Download
Sharp MX-2301N Operation Manual Download Page 120

2-18

COPIER

Contents

AUTOMATIC 2-SIDED COPYING USING THE 
DOCUMENT GLASS

Automatic 2-sided copying of 1-sided 
originals

1

Open the automatic document feeder, 
place the original face down on the 
document glass, and then gently close 
the automatic document feeder.

• Align the corner of the original with the tip of the arrow mark 

 on the document glass scale.

• Place the original in the appropriate position for its size as 

shown above.

• After placing the original, be sure to close the automatic 

document feeder. If left open, parts outside of the original will 
be copied black, causing excessive use of toner.

Do not place any objects under the original size detector. Closing the automatic document feeder with an object 
underneath may damage the original size detector plate and prevent correct detection of the document size.

2

Touch the [2-Sided Copy] key.

Originals

Copies

Original size 
detector

A4R (8-1/2" x 11"R)

B5R

B4 (8-1/2" x 14")

A3 (11" x 17")

A4 (8-1/2" x 11")

A5

(5-1/2" x 8-1/2")

B5

 mark

Document glass scale

Document glass scale

 mark

Ready to scan for copy.

2-Sided Copy

0

Output

Special Modes

File

Quick File

Full Colour

Colour Mode

Auto

Exposure

100%

Copy Ratio

Original  A4

2.

3.

4.

1.

A4R

B4
A3

A4

Job Detail

Settings

A4

Plain

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments