manualshive.com logo in svg

Sharp MX-2301N, Operation Manual, Page: 410 / 817

Share
Download
Sharp MX-2301N Operation Manual Download Page 410

4-85

FACSIMILE

Contents

5

Press the [BLACK & WHITE START] key.

Scanning begins.

• If you inserted the original pages in the document feeder tray, all pages are scanned.

A beep will sound to indicate that scanning is finished.

• If you are scanning the original on the document glass, scan each page one page at a time.

When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have 
been scanned and then touch the [Read-End] key.
A beep will sound to indicate that scanning is finished.

To cancel scanning...

Press the [STOP] key (

) to cancel the operation.

For a broadcast transmission, changes to the transaction report print conditions apply to all destinations.

To cancel the transaction report setting...

Touch the [Cancel] key in the screen of step 4.

•

System Settings (Administrator): Transaction Report Print Select Setting

This is used to set the conditions for printing transaction reports.

The factory default setting is 

.

Single Sending: Print Out All Report/

/No Printed Report

Broadcasting:

/Print Out Error Report Only/No Printed Report

Receiving:

Print Out All Report/Print Out Error Report Only/

Confidential Reception (fax mode): 

/No Printed Report

•

System Settings (Administrator): Original Print on Transaction Report

The first page of a transmitted fax can be printed on the transmission report.

Print Out Error Report Only

Print Out All Report

No Printed Report

Print Out Notice Page

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments