manualshive.com logo in svg

Sharp MX-2301N, Operation Manual, Page: 523 / 817

Share
Download
Sharp MX-2301N Operation Manual Download Page 523

5-75

SCANNER/INTERNET FAX

Contents

WHITENING FAINT COLOURS IN THE IMAGE
(Suppress Background)

This feature is used to suppress light background areas.

• This function cannot be used in Internet fax mode.

• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

2

Specify the destination.

☞

ENTERING DESTINATIONS

 (page 5-18)

When scanning to USB memory, there is no need to specify the destination. Go to step 3.

3

Select the special modes.

(1) Touch the [Mode Switch] key and select the desired mode.

(2) Touch the [Job Detail Settings] key.

(3) Touch the [Special Modes] key.

(4) Touch the [Suppress Background] key.

Read the message that appears and then touch the [OK] key.

☞

SPECIAL MODES

 (page 5-64)

The lightness level at which 
suppression takes place 
can be adjusted.

Level [+]

Level [-]

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments