manualshive.com logo in svg

Sharp MX-2301N, Operation Manual, Page: 224 / 817

Share
Download
Sharp MX-2301N Operation Manual Download Page 224

2-122

COPIER

Contents

8

Press the [COLOUR START] key or the [BLACK & WHITE START] key.

One set of copies is printed again using the adjusted settings. Check the results. If further adjustments are needed, repeat 
steps 6 through 8. (Repeating Proof Copy does not decrease the remaining number of sets to be printed.)

9

Touch the [End] key.

You will return to the base screen of copy mode and the 
remaining sets will be printed.

To cancel scanning and copying...

Press the [STOP] key (

).

If Proof Copy is executed while the machine is printing another job, the other job is interrupted and the proof copies are 
printed. The previous job will resume after the proof copies are printed.
However, if proof copy is executed during output of a job for which both two-sided printing and stapling are enabled, the proof 
copy will be output after the job in progress is finished. 
If the [End] key is touched to execute printing of the remaining sets while the machine is printing another job, the remaining 
sets will be printed after all previously reserved jobs are completed.

Press [End] to continue.
To make a proof copy again, press
[Start].

Change

End

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments