manualshive.com logo in svg

Sharp MX-2301N, Operation Manual, Page: 398 / 817

Share
Download
Sharp MX-2301N Operation Manual Download Page 398

4-73

FACSIMILE

Contents

4

Specify the original size.

(1) Enter the original size.

• Touch the X (width) numeric value display key and 

enter the width.

• Touch the Y (height) numeric value display key and 

enter the height.

(A) To return the original size to the default size, touch 

the [Size Reset] key.

(B) To automatically enlarge or reduce the image size to 

the send size, touch the [Fit to Send Size] key. Do not 
touch this key if you wish to scan the original at the 
original size that you entered.

(2) Touch the [OK] key.

• You can also touch the 

 keys to change the number.

• The send size is automatically selected based on the original size you entered.

• After selecting Card Shot, you can touch the [Job Detail Settings] key in the base screen and then the [Original] key 

to change the original scan size or the send size. In this case, the screen of step 3 appears when you touch the 
scan size key. For the procedure for setting the send size, see "

Specifying the send size of the original

" (page 4-49).

5

Press the [BLACK & WHITE START] key to scan the front of the card.

To cancel scanning...

Press the [STOP] key (

).

6

Turn the card over so that the back is face down, and press the [BLACK & 
WHITE START] key to scan the back of the card.

Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.

To cancel scanning...

Press the [STOP] key (

).

7

Touch the [Read-End] key.

If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, 
resolution, scan size, and send size.

• The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.

• This function cannot be used in direct transmission mode or when the speaker is used to dial.

To cancel Card Shot...

Touch the [Cancel] key in the screen of step 4.

Special Modes

OK

OK

Cancel

Size Reset

Fit to

Send Size

Card Shot

X

Y

(25~210)
mm

(25~210)
mm

86

54

(1)

(2)

(B)

(A)

X

Y

Place next original.       (Pg.No.x)
Press [Start].
When finished, press [Read-End].

Read-End

configure

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments