manualshive.com logo in svg

Sharp MX-2301N, Operation Manual, Page: 367 / 817

Share
Download
Sharp MX-2301N Operation Manual Download Page 367

4-42

FACSIMILE

Contents

4

Resend to unsuccessful destinations.

(1) Touch the [Failed] tab.

(2) Touch the [Retry] key.

• The procedure after the [Retry] key is touched varies depending on whether or not the document filing function was 

used.

Not using document filing

You will return to the base screen with the unsuccessful destinations entered. Place the original and perform the 
broadcast transmission operation.

Using document filing

The document filing operation selection screen will appear with the unsuccessful destinations entered. Perform the 
document filing resend procedure. (There is no need to rescan the original.)
If the job was stored in a confidential folder or was stored as confidential file, a password entry screen will appear 
after you touch the [Retry] key. Enter the password.

• If the [All Destinations] key is touched in (1), all destinations will be displayed. The [Retry] key that appears in the 

screen can be touched to resend to all destinations.

OK

Retry

Detail of

Broadcast0003

1/ 1

All Destinations

Failed

File

DDD DDD

EEE EEE

10:01 04/04 

NG000000

NG000000

10:10 04/04 

Address

Start Time

Status

002

010

(1)

(2)

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments