Sharp MX-2301N Operation Manual Download Page 345

Page: 345 / 817

4-20

FACSIMILE

Contents

USING A SEARCH NUMBER TO RETRIEVE
A DESTINATION

A destination stored in the address book can be retrieved using the

key. This can be done in the base screen of

any of the modes or in the address book screen.

Touch the

key.

Enter the 3-digit search number of the
address with the numeric keys.

When the 3-digit search number is entered, the stored address
is retrieved and specified as a destination.

• The search number is programmed when the destination is stored in the address book.

• If you do not know the search number, print the one-touch address list using "Sending Address List" in the system

settings.

• When entering search numbers such as "001" and "011", "0" can be omitted. For example, to enter "001", enter "1"

and touch the

key or the [Next Address] key.

If an incorrect search number is entered...

Press the [CLEAR] key (

) to clear the number and enter the correct number.

Quick File

File

Special Modes

Sub Address

Speaker

Resend

Scan

Send

Auto

Address Book

Ready to send.

Fax

Mode Switch

Job Detail

Settings

Direct TX

Memory TX

Auto Reception

Fax Memory:100%

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2301N, Operation Manual, Page: 345 / 817

Search results

Summary of Contents for MX-2301N

Reviews: