Sharp MX-2301N Operation Manual Download Page 767

Page: 767 / 817

7-153

SYSTEM SETTINGS

Contents

System Settings for Fax (Administrator) List

When the system settings are accessed with administrator rights, the following items appear. The factory default setting
for each item is also shown.

Image Send Settings

Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.

Item

Factory default setting

Page

■

Image Send Settings

7-155

●

Fax Settings

7-155

Fax Default Settings

7-155

Dial Mode Setting

Tone

7-155

Auto Wake Up Print

Enable

7-155

Pause Time Setting

2 sec.

7-155

Fax Dest. Confirmation Mode

Disable

7-155

Speaker Settings

7-155

• Speaker

Volume: 5

• Ringer Volume

Volume: 5

• Line Monitor

Varies depending on country and region

• Fax Receive Complete Signal

Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time Setting: 3 sec.

• Fax Send Complete Signal

Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time Setting: 3 sec.

• Fax Communication Error Signal

Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time Setting:
Every 0.3 seconds

Remote Reception Number Setting

7-156

Original Print on Transaction Report

Print Out Error Report Only

7-156

Transaction Report Print Select Setting

7-156

• Single Sending

Print Out Error Report Only

• Broadcasting

Print Out All Report

• Receiving

No Printed Report

• Confidential Reception

Print Out Notice Page

Activity Report Print Select Setting

7-156

• Auto Print at Memory Full

Disable

• Print Daily at Designated Time

Disable

ECM

Enable

7-157

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2301N, Operation Manual, Page: 767 / 817

Search results

Summary of Contents for MX-2301N

Reviews: