Sharp MX-2301N Operation Manual Download Page 652

Page: 652 / 817

7-38

SYSTEM SETTINGS

Contents

Direct entry

Checking addresses

• To enter an address that is not stored in a one-touch

key, touch the [Direct Entry] key, select the mode, and
enter the address.

• To check the addresses that have been selected,

touch the [Address Review] key in the address
selection screen. The selected addresses are
displayed.

• To deselect an address from the group, touch the

displayed address.
A message will appear to confirm the deletion. Touch
the [Yes] key.

It will not be possible to directly enter an address from the group if this has been prohibited using "

Disable Registering

Destination from Operation Panel

" (page 7-111) in the system settings (administrator).

Direct Address / Group

Select address.

Direct Entry

Address Review

Sort Address

ABCD

CCC CCC

BBB BBB

AAA AAA

Fax

Direct SMTP

E-mail

Internet Fax

Freq.

Direct Address / Group

Select address to deselect.

Group Name :BBB BBB

AAA AAA

BBB BBB

CCC CCC

001

002

003

1/1

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MX-2301N


















































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2301N, Operation Manual, Page: 652 / 817

Search results

Summary of Contents for MX-2301N

Reviews: